Arcadia Model 5 Stereo SE 300B Power Amplifier

Following on from the successful launch of the SJS Arcadia Model 3 MM RIAA Phono amplifier, SJS Electroacoustics are pleased to present the matching all new bespoke Arcadia Model 5 stereo singled ended 300B power amplifier.

In common with other SJS Arcadia amplifiers it has been specifically engineered for sonic performance rather than technical specification, and fulfills SJS Electroacoustics primary design criteria:

• Single Ended circuit topology
• Pure Class A operation
• Zero negative feedback
• Valve rectification and choke smoothed HT power supply
• Custom made HT T-network power supply capacitors with silver leads
• Separate mains transformers for HT and filament supplies
• Point-to-point circuit wiring without PCBs
• Hand built
• Real solid wooden frame
• 4mm aluminium panels, black or natural anodized
• Soundcare SuperSpiked feet

The Arcadia Model 5 power amplifier is a modern implementation of the classic 6SN7-6SN7-300B topology with a few tweaks, mainly in the psu design, component selection and layout.

The standard version is supplied with large wide bandwidth multi-section IE core output transformers, carbon film resistors and high quality film and copper foil coupling capacitors.

It is possible to upgrade this is stages to the Enhanced version including:

• tantalum film resistors
• Black Gate bypass capacitors
• Duelund CAST DC coupling capacitors
• Custom HiB double C-core output transformers
• Pure silver wire for all point to point connections

Inside a Standard+ version:

Inside a Enhanced version

Technical Specifications

Input Impedance	100kOhm
Input Sensitivity	400mV for full output
Power Output	8W per channel
Frequency Response	+/-3dB 8Hz-30KHz
Valve Compliment	2 x 6SN7 2 x 300B 1 x 5U4G
Max. Power Consumption	250 Watts
Unit Weight	30 kg
Shipping Weight	49 kg (Original Packaging: Customised flight case)
Unit Dimensions	300mm (h) x 450mm (w) x 400mm (d)
Shipping Dimensions	400mm (h) x 545mm (w) x 500mm (d)
	(Original Packaging: Customised flight case)

Design Options

The Model 5 SE 300B power amplifier is hand built to order in England, and therefore we are able to offer customisation to meet your aesthetic and sonic preferences. The solid wooden chassis is available in a range of four standard choices; cherry, maple, light oak and walnut with others such as zebra wood available to special order. The chassis panels are available in either natural or black anodised aluminium as standard, with other colours, such as blue, red or gold, available to special order.

Bespoke customisation of the internal components is also possible to meet our clients' specific requirements, whether it be for use of a certain interconnect cable between the phono sockets and the circuit, or replacement of the coupling capacitors, power supply capacitors or resistors, for example, these can be discussed at the point of ordering.